Programming Switching Times

• Press PROG 
• Type the User Security Code   
• Press ENTER 
• Press 2 for Data 
• Type Start Time for Monday Period 1 
• Press ENTER
• Type End Time for Monday Period 1 
• Press ENTER 
• Repeat if further switching times are required - (Max 3 periods per day) 
• Press RUN to return to the Normal Run Mode 

OVERRIDING THE HEATMISER

• Press the OVERRIDE key
• Enter the User Security Code (if required)
• Press ENTER
• Press 1 to enter the Override mode
• Select either 1 or 2 to override the zone ON(1) or OFF(2)
• Now enter the required Override period (e.g. 02 for 2 hours)
• Press ENTER mode 

ALTERING TEMPERATURE SETTINGS 

• Press PROG
• Type the User Security Code, press enter
• Select 1 for Temp
• Type the required day temperature (eg. 22°C)
• Press ENTER
• Select 1 if you require Frost Protection or 2 if you do not
• Enter, if required, the Frost setting (e.g. 08°C) •Enter, if required, the summer fan differential Setting. This is the number of °C above the DAY temperature that the summer fan relay will be activated.
• Press ENTER
• Press RUN to return to the Normal Run Mode 

TIME AND DATE

• Press PROG
• Type the User Security Code
• Select 3 for System
• Select 1 for System Time
• Enter the current Time (e.g. 07.00)
• Press ENTER
• Enter the current date (e.g. 18-06-03)
• Press ENTER
• Enter the day of the week (e.g. 1=Mon, 7=Sun)
• Press RUN twice to return to the Normal RUN mode

PROGRAMMING HOLIDAY PERIODS 

• Press PROG
• Type the User Security Code
• Select 4 for Hols
• Enter the holiday start date (e.g. 24-12-03)
• Press ENTER •Enter the length of the holiday period (e.g. 10 days)
• Repeat for further holidays
• Press RUN twice to return to the Normal RUN mode 

NOTE:

• 24 Hour Clock Notation should be used when programming the Heatmiser.
• All Switching times should be actual occupancy times, no warm up period is needed.